Measurement applications
Battery Electrode
Burr Inspection
Plan optical burr inspection for battery electrodes and tabs. Define the measured edge, sample handling and reporting before selecting a manual or automatic instrument.
Define the edge characteristic first
An electrode inspection request needs more than a general instruction to find burrs. Identify the edge, tab or cut feature, its viewing direction and the dimension required on the drawing. Agree how the reported value will be determined and compared with the acceptance limit.
Thin samples can deform during handling, and reflective edges can appear different under changing illumination. The fixture, preparation and viewing conditions are part of the measurement plan. A stated optical magnification does not by itself establish the accuracy of the complete inspection.
| Inspection task | What to review | Setup considerations |
|---|---|---|
| Cut electrode edge | Specified visible edge and burr features | Agree viewing direction, lighting and the feature boundary. |
| Tab or foil sample | Accessible profile and dimensional checks | Use support that does not alter the edge being inspected. |
| Repeat batch sampling | A consistent routine and traceable records | Define loading, orientation, part identification and handling of uncertain results. |
Equipment routes to evaluate
Manual sample inspection
Review the HVM MC manual burr instrument for operator-positioned samples and application trials. Validate the complete setup against the requested feature.
Automatic measurement routines
Review the MC-CNC automatic instrument for repeat routines. Confirm rotary-fixture, software and data-output requirements in the selected configuration.
Production integration
If the task includes feeding, sorting or line communication, use a separate automation review. A CNC instrument should not be assumed to include a complete inline handling system.
A practical application review
- Supply the edge definition, tolerance and annotated sample images.
- Include realistic finishes and samples close to the proposed acceptance limit.
- Compare repeated results after repositioning, with the illumination and fixture documented.
- Agree the sampling plan, records and escalation process for unclear edges.
Include the part drawing, material and finish, representative samples, expected inspection volume and any data-export requirements. Record difficult or uncertain features so the review can address them directly.
For practical method guidance, read Optical burr inspection workflow. The selected configuration and measurement conditions should be confirmed through the application review.
Questions before selecting equipment
Is 0.002 mm a universal inspection capability?
No single figure should be applied to every sample and setup. Request the selected model specification and evaluate the actual feature, conditions and measurement result.
Is automatic feeding included?
It must be explicitly specified. Discuss loading, rotation and any line interface separately from automatic measurement motion.
More practical guidance
Discuss your inspection task
Share a drawing or annotated image, the features and tolerances, sample dimensions and expected inspection volume. We can then review a suitable configuration.