Engineering and integration

Custom Inspection
Automation

Review custom measuring equipment, fixtures, handling and data interfaces. Define the workpiece, measurement targets and acceptance conditions for a project proposal.

Define the measurement and the production task

A custom inspection project should describe both the feature to be measured and how the part moves through the process. A programmed measuring machine is not automatically a complete inline inspection system. Loading, locating, identification, results handling and interfaces each need a defined scope.

Begin with the drawing, tolerance, material, part variation and acceptance requirement. Then describe current handling, target inspection volume, available space and the production environment. This allows the application review to separate an equipment configuration from additional engineering.

Work packages to review

Measurement feasibility

Evaluate feature visibility or probe access, representative samples, fixtures and a suitable reference for the required result.

Handling and positioning

Define manual loading, trays, rotary fixtures or other proposed handling. Confirm the workpiece orientation and how it is held without distortion.

Software and data

Specify the report fields, part identity and any MES or other system interface. Available formats and integration work depend on the selected configuration.

Acceptance and support

Agree the complete cycle definition, measurement conditions, acceptance evidence, documentation and support responsibilities before committing to delivery.

From sample trial to an agreed proposal

  1. Share a marked drawing and representative samples, including difficult features and realistic variation.
  2. Review the measurement approach before finalising the mechanical or software scope.
  3. Compare a pilot routine with the required result and complete loading-to-reporting cycle.
  4. Record configuration, exclusions, acceptance criteria, delivery terms and support responsibilities in the proposal.

Some requirements may be met by a standard CNC vision system with suitable fixtures. Others need a separate engineering review. Our automated measurement planning guide explains how to structure the evaluation.

Engineering requirements and commercial partnerships

Use this page for the technical scope of a measurement or integration project. If your main requirement is private branding, distribution or repeat wholesale purchasing, start with OEM and distributor partnerships. The commercial and technical reviews can then use the same approved specification.

Can an existing machine be integrated into my production line?

Share the model, interface requirements and line layout. Compatibility, handling and safety responsibilities require project-specific review.

Can you quote from a cycle-time target alone?

The quote also needs the part, required measurements, loading method, reporting and acceptance conditions. A target is a requirement to evaluate, not a confirmed performance guarantee.

Discuss your inspection task

Share a drawing or annotated image, the features and tolerances, sample dimensions and expected inspection volume. We can then review a suitable configuration.

Request an application review →