Home  ›  Products  ›  Fully automatic video measuring machine  ›  HVM ZCNC Series
HVM ZCNC Series · Fully Automatic Optical Measurement

Enhanced Fully Automatic Video Measuring Machine

The enhanced fully automatic HVM ZCNC Series combines a precision granite stage, imported high-speed linear guides and a 0.1 μm metal foil scale. An automatic zoom lens supports synchronized height and flatness measurement, while scientific color digital imaging and MES-ready YZ-AICNC software support the automatic inspection workflow. Choose from three X/Y travel ranges, from 300 × 200 mm to 500 × 400 mm.

  • Automatic zoom lens
  • 0.1 μm metal scale
  • Panasonic AC servo
  • YZ-AICNC · MES-ready
Key product features

Built for Practical Dimensional Inspection

Review the HVM ZCNC Series optical imaging, positioning, lighting, software and mechanical features before choosing a model.

Precision Granite Stage

Precision granite stage for a stable and reliable measurement platform.

Imported High-Speed Linear Guide

Imported high-speed linear guide for fast, quiet movement.

0.1 μm Metal Foil Scale

Metal foil scale with a listed 0.1 μm resolution. The Setting table gives the equivalent value of 0.0001 mm.

Automatic Zoom & Height/Flatness

Automatic zoom lens with synchronized height and flatness measurement as listed in the Features.

8-Zone LED Ring Lighting

Multi-angle ring lighting supports clearer edge detection. The Setting table specifies a 5-ring, 8-zone programmable LED source.

Imported Scientific Camera

Imported scientific camera, described in the Features as providing higher pixel count and magnification.

Full Closed-Loop Control

Full closed-loop control is designed to improve repeatability.

Custom Reports & Automatic Judgment

Custom reports with automatic output and judgment of measurement results.

Choose by travel range

Compare the Three HVM ZCNC Models

Start with the dimensions of your largest workpiece and the measurement area required for your inspection tasks.

HVM-3020ZCNC

300 × 200 mm

X/Y travel

Glass plate: 340 × 240 mm

Machine weight: 460 kg

HVM-4030ZCNC

400 × 300 mm

X/Y travel

Glass plate: 440 × 340 mm

Machine weight: 540 kg

HVM-5040ZCNC

500 × 400 mm

X/Y travel

Glass plate: 540 × 440 mm

Machine weight: 670 kg

Technical data

HVM ZCNC Series Technical Specifications

Compare the listed specifications for all three configurations. Confirm the final configuration and acceptance conditions with the supplier before ordering.

Model-specific specifications
SpecificationHVM-3020ZCNCHVM-4030ZCNCHVM-5040ZCNC
X/Y Travel (mm)300 × 200400 × 300500 × 400
Z Travel (mm)200 (customizable to 500 mm)200 (customizable to 500 mm)200 (customizable to 500 mm)
Overall Dimensions (mm)1820 × 820 × 18001950 × 1000 × 18002100 × 1160 × 1800
Glass Plate Size (mm)340 × 240440 × 340540 × 440
Machine Weight (kg)460540670
Maximum Workpiece Load (kg)303030

Shared Technical Specifications

Shared enhanced fully automatic settings
Base MaterialGrade-00 granite base
Structure MaterialGranite stage and column
X/Y Accuracy (μm)1.8+L/200
Z Accuracy (μm)5+L/200
Repeatability (μm)2
X/Y Axis Speed0–400 mm/s
Z-Axis Speed0–200 mm/s
OperationAutomatic
TransmissionGround ball screw + linear guide
Glass Scale (source row label)0.0001 mm metal scale
GuidewayHiwin (Taiwan) high-speed linear guide
Drive ScrewTBI (Taiwan) ground ball screw
3-Axis MotorPanasonic (Japan) AC servo
Motion ControllerYZ-4000 full closed-loop control
Joystick3-axis stepless handle
Imaging SystemScientific color digital imaging (HD, size switchable)
Light Source5-ring, 8-zone programmable LED light
Optical LensYZ-0745Z automatic zoom lens (HD)
Magnification20×–260×
Measuring SoftwareYZ-AICNC automatic measuring software (MES-ready)
ComputerCustom configuration
Power Supply110–220 V, single-phase, 50 Hz
Operating Environment20°C ± 2°C; 30–80% RH
Available Options0.5×–10× zoom objective, navigation, probe, laser, robot arm and fixture

Specification note: The Features list states a 0.1 μm metal foil scale; the Setting row labeled “Glass Scale” states a 0.0001 mm metal scale. These values are equivalent; the source row label is retained. Scale resolution, accuracy and 2 μm repeatability are separate specifications. Confirm the definition and unit of L and applicable test conditions. The source does not specify the automatic lens zoom ratio. Confirm the imaging system’s “size switchable” configuration and the option abbreviated “nav.” (navigation).

Inspection use cases

Applications

The appropriate model depends on workpiece size, features to be measured and the required inspection process.

Automatic Dimensional Inspection

Use scientific color digital imaging and YZ-AICNC software for automatic inspection.

Height & Flatness

Use the automatic zoom workflow described in the supplied Features for synchronized height and flatness measurement.

Edge Detection

Adjust multi-angle LED ring illumination for viewing workpiece edges.

Automatic Reporting

Output custom reports and automatic measurement judgments.

Frequently asked questions

HVM ZCNC Series FAQs

Common questions to consider when selecting an enhanced fully automatic video measuring machine.

How do the three enhanced models differ?

HVM-3020ZCNC, HVM-4030ZCNC and HVM-5040ZCNC list X/Y travel of 300 × 200, 400 × 300 and 500 × 400 mm. Glass plate size, footprint and weight differ by model.

What Z travel and load are listed?

Standard Z travel is 200 mm, customizable to 500 mm. Maximum workpiece load is listed as 30 kg.

Which automatic lens and imaging system are listed?

A YZ-0745Z HD automatic zoom lens and scientific color digital imaging are listed. Magnification is 20×–260×; the source does not give a separate lens zoom ratio.

Which drive, controller and software are listed?

Hiwin high-speed linear guides, TBI ground ball screws, Panasonic AC servos, YZ-4000 full closed-loop control and MES-ready YZ-AICNC automatic measuring software.

What accuracy, resolution and repeatability are listed?

X/Y accuracy is 1.8+L/200 μm, Z accuracy is 5+L/200 μm and repeatability is 2 μm. The metal scale value is 0.0001 mm, equivalent to 0.1 μm. Confirm the definition and unit of L and test conditions.

Which reporting functions and options are listed?

Custom reports, automatic output and judgment are listed. Options include a 0.5×–10× zoom objective, navigation, probe, laser, robot arm and fixture. Confirm configuration and compatibility.

Choose the Right HVM ZCNC Configuration

Share your workpiece dimensions, measurement requirements and preferred options. Ask the team to confirm the appropriate model and its technical configuration.

Contact Ideal Precision

Applications and inspection guides