Home  ›  Products  ›  Fully automatic video measuring machine  ›  HVM CNC Series
HVM CNC Series · Fully Automatic Optical Measurement

Classic Fully Automatic Video Measuring Machine

The classic fully automatic HVM CNC Series combines a precision granite stage, imported high-speed linear guides and full closed-loop control. HD digital imaging and MES-ready YZ-CNC software support programmed automatic measurement, shared programs and custom reports with automatic output and judgment. Choose from four X/Y travel ranges, from 300 × 200 mm to 600 × 500 mm.

  • Four automatic models
  • Hiwin high-speed linear guide
  • 0.0005 mm glass scale
  • YZ-CNC · MES-ready
Key product features

Built for Practical Dimensional Inspection

Review the HVM CNC Series optical imaging, positioning, lighting, software and mechanical features before choosing a model.

Precision Granite Stage

Precision granite stage for a stable and reliable measurement platform.

Imported High-Speed Linear Guide

Imported high-speed linear guide for fast, quiet movement.

0.7×–4.5× Precision Zoom Lens

High-precision zoom lens with a switchable 0.7×–4.5× range.

8-Zone LED Ring Lighting

Multi-angle LED ring lighting supports clearer edge detection. The Setting table specifies a 5-ring, 8-zone programmable LED source.

Imported HD Digital Camera

Imported HD digital camera, described in the Features list as providing higher pixel count and magnification.

Full Closed-Loop Control

Full closed-loop control is designed to improve repeatability.

Smart Automatic Programming

Smart programming, fully automatic measurement and shared measurement programs.

Custom Reports & Automatic Judgment

Custom reports with automatic output and judgment of measurement results.

Choose by travel range

Compare the Four HVM CNC Models

Start with the dimensions of your largest workpiece and the measurement area required for your inspection tasks.

HVM-3020CNC

300 × 200 mm

X/Y travel

Glass plate: 340 × 240 mm

Machine weight: 410 kg

HVM-4030CNC

400 × 300 mm

X/Y travel

Glass plate: 440 × 340 mm

Machine weight: 490 kg

HVM-5040CNC

500 × 400 mm

X/Y travel

Glass plate: 540 × 440 mm

Machine weight: 620 kg

HVM-6050CNC

600 × 500 mm

X/Y travel

Glass plate: 640 × 540 mm

Machine weight: 750 kg

Technical data

HVM CNC Series Technical Specifications

Compare the listed specifications for all four configurations. Confirm the final configuration and acceptance conditions with the supplier before ordering.

Model-specific specifications
SpecificationHVM-3020CNCHVM-4030CNCHVM-5040CNCHVM-6050CNC
X/Y Travel (mm)300 × 200400 × 300500 × 400600 × 500
Z Travel (mm)200 (customizable to 500 mm)200 (customizable to 500 mm)200 (customizable to 500 mm)200 (customizable to 500 mm)
Overall Dimensions (mm)1650 × 750 × 17501750 × 900 × 17501900 × 1100 × 17502050 × 1300 × 1750
Glass Plate Size (mm)340 × 240440 × 340540 × 440640 × 540
Machine Weight (kg)410490620750
Maximum Workpiece Load (kg)20202020

Shared Technical Specifications

Shared classic fully automatic settings
Base MaterialGrade-00 granite base
Structure MaterialGranite stage and column
X/Y Accuracy (μm)2+L/200
Z Accuracy (μm)5+L/100
Repeatability (μm)2.5
X/Y Axis Speed0–300 mm/s
Z-Axis Speed0–150 mm/s
OperationAutomatic
TransmissionBall screw + linear guide
Glass Scale0.0005 mm glass scale
GuidewayHiwin (Taiwan) high-speed linear guide
Drive ScrewTBI (Taiwan) ground ball screw
3-Axis MotorAC servo motor
Motion ControllerYZ-4000 full closed-loop control
Joystick3-axis stepless handle
Imaging SystemHD digital imaging (HD, size switchable)
Light Source5-ring, 8-zone programmable LED light
Optical LensYZ-0745B zoom lens (manual/automatic)
Lens Zoom Range0.7×–4.5× switchable (Features)
Magnification20×–260× (Setting)
Measuring SoftwareYZ-CNC automatic measuring software (MES-ready)
ComputerCustom configuration
Power Supply110–220 V, single-phase, 50 Hz
Operating Environment20°C ± 2°C; 30–80% RH
Available Options0.5×–10× zoom objective, navigation, probe, laser, robot arm and fixture

Specification note: Confirm the definition and unit of L and applicable accuracy test conditions. The 0.0005 mm glass scale value, accuracy and 2.5 μm repeatability are separate specifications. The 0.7×–4.5× lens zoom range and 20×–260× magnification are listed separately as supplied. The optical lens is listed as manual/automatic; confirm the selected lens configuration. The source abbreviation “nav.” is shown as navigation; confirm this option and the imaging system’s “size switchable” configuration when ordering.

Inspection use cases

Applications

The appropriate model depends on workpiece size, features to be measured and the required inspection process.

Programmed Inspection

Create automatic measurement programs using the listed YZ-CNC software.

Repeat Measurement

Use full closed-loop control for repeat measurement workflows.

Edge Detection

Adjust multi-angle LED ring illumination for viewing workpiece edges.

Automatic Reporting

Output custom reports and automatic measurement judgments.

Frequently asked questions

HVM CNC Series FAQs

Common questions to consider when selecting a manual video measuring machine.

How do the four classic models differ?

HVM-3020CNC, HVM-4030CNC, HVM-5040CNC and HVM-6050CNC list X/Y travel of 300 × 200, 400 × 300, 500 × 400 and 600 × 500 mm. Glass plate size, footprint and weight also differ.

What Z travel and axis speeds are listed?

Z travel is 200 mm, customizable to 500 mm. Listed X/Y axis speed is 0–300 mm/s and Z-axis speed is 0–150 mm/s.

Which motion and control components are listed?

Hiwin high-speed linear guides, TBI ground ball screws, three-axis AC servo motors, YZ-4000 full closed-loop control and a 3-axis stepless handle.

Which software and reporting functions are listed?

YZ-CNC automatic measuring software is listed as MES-ready. Features include smart programming, shared programs, custom reports, automatic output and judgment. Confirm the MES integration requirements with the supplier.

What accuracy, repeatability and glass scale values are listed?

X/Y accuracy is 2+L/200 μm, Z accuracy is 5+L/100 μm, repeatability is 2.5 μm and the glass scale value is 0.0005 mm. Confirm the definition and unit of L and test conditions.

Which optics and optional accessories are listed?

The source lists a YZ-0745B manual/automatic zoom lens, 0.7×–4.5× zoom and 20×–260× magnification. Options include a 0.5×–10× zoom objective, navigation, probe, laser, robot arm and fixture. Confirm the supplied configuration and compatibility.

Choose the Right HVM CNC Configuration

Share your workpiece dimensions, measurement requirements and preferred options. Ask the team to confirm the appropriate model and its technical configuration.

Contact Ideal Precision

Applications and inspection guides